Skip to content
  • David Bauer's avatar
    ath79: add support for devolo WiFi pro 1200e · 1724d4e9
    David Bauer authored
    
    
    Hardware
    --------
    CPU:   Qualcomm Atheros QCA9558
    RAM:   128M DDR2
    FLASH: 16MiB
    ETH:   1x Atheros AR8035 (PoE in)
           1x Atheros AR8033
    WiFi2: QCA9558 2T2R
    WiFi5: QCA9880 2T2R
    BTN:   1x Reset
    LED:   1x LED blue
           1x LED red
    BEEP:  1x GPIO attached piezo beeper
    UART:  3.3V GND TX RX (115200-N-8) (3.3V is square pad)
           Header is located next to reset-button
    
    Installation
    ------------
    Make sure you set a password for the root user as prompted on first
    setup!
    
    1. Upload OpenWRT sysupgrade image via SSH to the device.
    Use /tmp as the destination folder on the device.
    User is root, password the one set in the web interface.
    
    2. Install OpenWRT with
    
    > sysupgrade -n -F /tmp/<openwrt-image-name>
    
    Signed-off-by: default avatarDavid Bauer <mail@david-bauer.net>
    1724d4e9